Kinetic Development Group Kinect MLOK 7 Slot Picatinny Rail Section / QD Sling Mount - Black
The Kinect by KDG for MLOK is a revolutionary QD mounting system that will change the way we attach accessories to our modular weapons platforms. Much like the Sidelok for Picatinny attachment, Kinect insures proper and easy installation, eliminating common variables that would cause issues.(i.e.: over tightening). Although revolutionary, Kinect is quite simple in its operation. There are two spring-loaded wedges in the base of the Kinect mounting point. When you press the accessory or rail section down in the MLOK slot, two tiny deployment triggers get pressed against the rail firing the wedges into place. There is nothing more frustrating that fiddling with a hex key (if you can find it) to get your accessories on an off your weapon with traditional modular rail sections. This changes the whole dynamic of the MLOK system and really makes every accessory truly removable with the ability to mount it in a second when needed.
- Length: 3.73 use with two MLOK section
- Width: .82 (20.9 mm)
- Height (over MLOK): .41 (10.5 mm)
- Finish: black anodized
- Compatibility: compatible with any MLOK rail system.
- Weight: 1.4 ounces
- Compatibility: any in-spec MLOK rail system
Notice: the Kinect system was designed and manufactured to the original specifications set by Magpul Industries for a rail thickness of .080 in. and .125 in. thick. The current specifications for MLOK are a thickness of .080 to .150 in. as many of the polymer MLOK products on the market have to be thicker to support glass filled polymer rail systems. Therefore KDG does not suggest, nor guarantee their Kinect product will work on these polymer products. Polymer rails can be modified to work, but KDG's Kinect system was intended for use on precision machined aluminum rails within the specification of .080 to .125 in. overall thickness. With the variable tolerances that polymer parts are capable of, it is not suggested you buy Kinect QD MLOK mounts unless you are sure the rail is within the specification, or you are able to modify your rail to fit the Kinect system. Measure the thickness of your polymer rails before ordering. If you have purchased a Kinect piece and it will not work with the polymer or other thicker after market MLOK accessories, contact KDG (firstname.lastname@example.org) so they can fix the issue for you.
For complete and current information on this item please see the manufacturer's website.
Satisfaction guaranteed. We are so confident that you will be 100% satisfied with this product that we have protected your purchase with our 30 day money back guarantee.
California residents: this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov.