The SLR Rifleworks Titanium Adjustable Sentry 7 Gas Block is CNC machined from Grade 5 Titanium and weighs only 0.811 oz / 23 grams. We recommend the additional purchase of our Extended Shaft Hex Ball Driver - the perfect length tool for reaching into and under those handguards to adjust the SLR Rifleworks Sentry Gas Block valve.
The SLR Sentry 7's ingenious seal provides 100% gas cut off, which prevents gas from fouling the meter screw, and complete disassembly is super easy and can be done in seconds. There are no tiny springs to corrode, break, or seize, and there are no tiny balls to seize or get lost. Compatible with standard gas tubes
and can be used on both small frame and large frame AR platforms. Single
tool click to adjust gas metering. Tool, roll pin and mounting screws
included. Compatible with all SLR handguards and most others.Single tool-click to adjust gas metering. Tool, roll pin, and stainless set screws included. Works with all SLR handguards and most others.
- Grade 5 titanium
- Proprietary Alloy flat spring with 900deg temper
- Melonite finish 4140 detent plunger
- Bead blast finish
- Weight: 0.811 oz / 23 grams
- Length: 1.0"
- Height: 1.365" (overall) and .44" tall from top of barrel
- Width: .875" (overall)
- Set screw spacing: 0.400"
An adjustable gas block is merely one piece of the Recoil Mitigation Package, designed to reduce and/or eliminate recoil, and is comprised of the following components:
- An adjustable gas block and/or an adjustable gas key
- A low mass bolt carrier group
- A tuned buffer spring
- A lightweight buffer
For complete and current information on this item please see the manufacturer's website.
Satisfaction guaranteed. We are so confident that you will be 100% satisfied with this product that we have protected your purchase with our 30 day money back guarantee.
California residents: this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov.