Q:Do you have a storage plug for this grip, or does there exist a plug that is compatible?
Asked by: frankspace
- 8/18/2024
A: We do not make a storage plug for the PDW Grip. We do not know of an existing and compatible plug even though one may exist. Thanks for the inquiry.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Is this just a magpul K2 XL? If not, then what is the difference?thank you in advance.
Asked by: Jonathan
- 8/29/2022
A: Of course, ALL grips have many similarities, but it's the differences that make the PDW grip unique. The PDW grip is made to the finest standards from an extremely durable fiber reinforced polymer, and is the result of extensive professional shooter feedback and engineering excellence that has produced one of the finest shooting upgrades in the market today. The PDW Grip sports a patented design with zones of moderately aggressive surface texture to provide unmatched gripping properties for positive weapon control in all environments.
The PDW Grip fits any mil standard lower receiver (forged or billet, AR15 or AR10) that accepts a standard AR grip and provides improved biomechanics to better align the trigger finger for a more comfortable and direct rearward trigger pull. Thanks to its hollow core design ( no internal storage ), the PDW Grip is very light, weighing only 2.1 oz. Since the PDW Grip is a drop in upgrade it is sold without a grip screw, but is available separately here.
Shooter Refined Ergonomics: at 14 degrees, the PDW Grip is 235% (19 degrees) more vertical than the standard A2 grip and is the most comfortable and relaxing grip on the marketplace. The PDW Grip places the hand's flexor muscles on more of the same plane for a more natural hand position with little to no fatigue even during prolonged use.
Optimized Biomechanics: small beavertail backstrap provides enhanced ergonomics and allows the operator's hand to ride high on the grip for improved recoil management and fire control.
Tactile Gripping Texture: much more aggressive texture than most other grips on the marketplace. Zones of more aggressive anti slip texturing on the palm panels for excellent gripping properties and for positive weapon control in all environments.
Features - All edges rounded for operator comfort - Reinforced beaver tail for extra rigidity - Aggressive PSP (Pentagonal Surface Projections) Texture on both palm panels for superior weapon control - Grooves on the front and rear backstraps for optimal anti slip surface and excellent gripping properties - Accommodates the seam commonly found on the beaver tail of forged lower receivers - Unique trigger guard design provides a very comfortable, and absolutely the best fit at the trigger guard area of any grip on the market - Grip pulls the operator's hand forward into the grip for a more positive grip and better operational control of the weapon - Robust design easily exceeds industry standards for quality, strength and durability
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Q:what is the weight of the Tactical Link PDW Grip For AR Style Rifles Item Id: TL-PDW-GRIP-BLK?
Also - what is the exterior? Is it rubberized or more plastic feel?
Also - does it come with pistol grip screw and star washer?
Asked by: Ben Heinrich
- 2/22/2022
A: For the answer to this question please see the product's title, description, features, and/or specs.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Hi, can you ship the Tactical Link PDW Grip to Canada? Thank you.
Asked by: Alex Dai
- 1/18/2022
A: Sure, we can ship this to Canada, BUT, while we are not international shipping/export experts, and while it does not seem like that item would be considered a restricted item, who knows for sure how current governmental agencies view this matter. It is common knowledge that each country has their own set of regulations and compliance issues relating to firearms, firearms components, and accessories for firearms. With few exceptions, we ship whatever is ordered under the presumption that 1) you are within your rights to own/possess the item(s) and 2) that the item(s) you purchase are legal in your country. Because the laws are different from country to country, state to state, municipality to municipality and continually changing, 100% of the responsibility is on you, the purchaser (not Tactical Link) to know the laws where you reside and/or intend to use the item(s) purchased before an order is placed. Furthermore, Tactical Link is not and will not be liable for any expenses or items that are temporarily or permanently seized, impounded, returned, or confiscated by US Customs & Border Protection, domestic law enforcement, or international customs. In other words, if you purchase an item or items that may be seized by the US Customs & Border Protection, domestic law enforcement, or international customs and it is returned or becomes seized by the US Customs & Border Protection, domestic law enforcement, or international customs, the loss of the seized merchandise (including any and all other merchandise enclosed within the package that is not necessarily the subject of seizure but is seized by proxy) and any resulting financial loss and/or legal liability is entirely your responsibility even if the product(s) you purchased and are attempting to import into your country/state/municipality are legal within the country/state/municipality where you reside and/or intend to use the item(s) purchased.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a few Questions, How does the Does the Tactical Link PDW grip fit for a person with large hands? Does the Tactical Link PDW grip have a rubber over mold or is it hard plastic? Is there an option for a bottom cover, or do you know what covers will work with the PDW Grip? these are the questions that are stopping me from purchasing at this time
Asked by: Aaron Short
- 10/5/2021
A: The PDW grip fits medium sized hands but we've never heard of anyone complaining that the grip was too small so it just depends on the size of your hand. Hard plastic. No option for a bottom plug/cover. We do not know of any covers that are compatible with the PDW Grip. Thanks for the inquiry.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
A: Sure, we can ship this item internationally, BUT, we are not international shipping/export experts; and while it does not seem like that item would be considered a restricted item, who knows for sure how current governmental agencies view this matter. It is common knowledge that each country has their own set of regulations and compliance issues relating to firearms, firearms components, and accessories for firearms. With few exceptions, we ship whatever is ordered under the presumption that 1) you are within your rights to own/possess the item(s) and 2) that the item(s) you purchase are legal in your country. Because the laws are different from country to country, state to state, municipality to municipality and continually changing, 100% of the responsibility is on you, the purchaser (not Tactical Link) to know the laws where you reside and/or intend to use the item(s) purchased before an order is placed. Furthermore, Tactical Link is not and will not be liable for any expenses or items that are temporarily or permanently seized, impounded, returned, or confiscated by US Customs & Border Protection, domestic law enforcement, or international customs. In other words, if you purchase an item or items that may be seized by the US Customs & Border Protection, domestic law enforcement, or international customs and it is returned or becomes seized by the US Customs & Border Protection, domestic law enforcement, or international customs, the loss of the seized merchandise (including any and all other merchandise enclosed within the package that is not necessarily the subject of seizure but is seized by proxy) and any resulting financial loss and/or legal liability is entirely your responsibility even if the product(s) you purchased and are attempting to import into your country/state/municipality are legal within the country/state/municipality where you reside and/or intend to use the item(s) purchased.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:will this fir my Camdon Defense Rifle and what does installation require?
Asked by: Jon
- 11/14/2020
A: As is stated in the description, the PDW Grip fits mil standard lower receivers (forged or billet, AR15 or AR10) that accepts a standard AR grip. Since the PDW Grip is a drop in upgrade, it is sold without a grip screw and installs just like any other standard grip.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Good morning, I'm the production manager with Radian Weapons, I aslo handle most of our purchasing. I'm looking for some different grip options for our rifle builds and I'm hoping to chat with somebody about your products. Looking forward to hearing from you.
Q:I want to Cerakote my PDW Grip, do you know if this material can survive the 325°F bake temp?
Asked by: Bill
- 9/6/2019
A: I don't see why not. Years ago, we used to run sample production runs (used clear/white nylon) for testing purposes and would use those clear/white parts to be sent off to have cerakoted. Did it for thousands of parts. If I remember correctly, I think the material temperature is something like 600 degrees when the material flows into the mold/tool. Obviously we can't warrant anything but you should be fine. Thanks for the inquiry. Tactical Link
Was this answer helpful?
2 of 3 Customer(s) found this Answer helpful.
Q:Two questions. Does this grip come with a plug for storage? More important, do you know if this grip fits up nice with Palmetto Arms Gen 2 Lowers or does it have a gap?
Asked by: Charlie
- 5/3/2019
A: Pasted from the item description: "The PDW Grip fits any mil-standard lower receiver (forged or billet, AR15 or AR10) that accepts a standard AR grip and provides improved biomechanics to better align the trigger finger for a more comfortable and direct rearward trigger pull. Thanks to its hollow core design (no internal storage), the PDW Grip is very light, weighing only 2.1 oz. Since the PDW Grip is a drop-in upgrade it is sold without a grip screw." Thanks for the inquiry. Tactical Link
Was this answer helpful?
0 of 2 Customer(s) found this Answer helpful.
A: The PDW Grip is a drop-in replacement grip for, and compatible with, lower receivers (forged or billet, AR15 or AR10) made with mil-standard dimensions. The degree to which your weapon shares these dimensions will determine the quality of fit with items such as the PDW Grip and other similar devices. Said another way, the more your weapon deviates from “standard” the less likely your weapon will be compatible with products such as the PDW Grip. Thanks for the inquiry. Tactical Link
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
A: The PDW Grip is a drop-in replacement grip for, and compatible with, lower receivers (forged or billet, AR15 or AR10) made with mil-standard dimensions. The degree to which your weapon shares these dimensions will determine the quality of fit with items such as the PDW Grip and other similar devices. Said another way, the more your weapon deviates from “standard” the less likely your weapon will be compatible with products such as the PDW Grip. Thanks for the inquiry. Tactical Link
Was this answer helpful?
2 of 3 Customer(s) found this Answer helpful.